Features of Servo control Voltage Stabilizer(why choose us)
1. High quality Isolation transformer,insulation level is H
2. Input switch use N0.1 China brand -Chint brand,or Schneider (option)
3. Efficiency up to 99%
4. Independent or Dependent Three Phase Regulation subject to the order

5.Over load capacity is 200%-5s,150%-1min

6.Low loss
7. Rich protection functions
8. Manual bypass(use red copper materials)
9. With Surge protection, with over temperature protection,with time delay protection.
10. Remote control with RS232 or RS485 ( optional )
11. Indoor use IP23(Nema 2),Out door use IP54(Nema 3 R)or 65(option)

12.High customization ability

20kva -60KVA three phase Servo motor Type voltage stabilizer
Input range:380V/400V/415V±20%
Output :380V/400V/415V
Output accuracy ±1%-±5%(factory setting 2%)
Output Frequency 50Hz/60Hz (LCD display will be identify automatc 50 or 60Hz)
Power factor 0.8 or 0.9,1 option( general AVR 0.8)
Waveform distortion No distortion(same as input waveform)
Efficiency ≥98%(on full load)
Overload capacity 150% for 5 minutes,200% for 1 minute
Response time <10ms
THD <3%(linear load)

LCD display
Display	5.0 LCD digital dispaly
LCD display show	Input Phase to netural
	Input phase to phase
	Output phase to neutral
	Output phase to phase
	Load Current in each phases(press button to switch )
	Frequency (50 or 60hz autoamtic indentify show)
	Working temperature
Function
Normal functions	Malti-protect fuction,over voltage/under voltage protection,over current protection,over load protection,saty start protection,manual bypass protection,short circuit protection,lack of phase protection,wrong sequence  protection,indicate alarm,over temperature protection.